Asrock IMB-1000D
Mini-ITX Motherboard.- Intel® Bay Trail SoC Processor J1900
- 2 x 204-pin SO-DIMM up to 16GB DDR3L 1333 MHz (8GB per DIMM)
- 1 x Mini PCIe, 1 x USB 3.1 Gen1, 5 x USB 2.0, 2 x M.2 Key M (1 for SSD, 1 for VPU), 6 x COM, 1 x SATA2
- 1 x POE Power slot for ASRI PSE module
- (Optional: LAN4 supports POE function by PSE-30W/PSE-15W)
- 2 x Intel® Gigabit LAN, 2 x Realtek Gigabit LAN
- Supports dual display, 1 x HDMI 1.4a, 1 x VGA
- TPM Header
- 12V DC-in
Industria / Placas
Kiosk
Kiosk
Specifications
Processor System
CPU | Intel® Bay Trail SoC Processor J1900, QC, 2.00GHz, 10W |
---|---|
Chipset | SoC |
BIOS | AMI SPI 64 Mbit |
Form Factor
Dimensions | Mini-ITX (6.7-in x 6.7-in, 17.0 cm x 17.0 cm) |
---|
Memory
Technology | Dual Channel DDR3L 1333 MHz |
---|---|
Capacity | 16 GB (8GB per DIMM) |
Socket | 2 x 204-pin SO-DIMM |
Graphics
Controller | Intel® Gen7 Graphics DX 11 |
---|---|
HDMI | HDMI 1.4a Max resolution up to 1920x1200@60Hz |
VGA | Max resolution up to 1920x1200@60Hz |
MultiDisplay | Dual Display |
Expansion Slot
mini-PCIe | 1 x Full/Half size with PCIe x1 and USB 2.0 |
---|---|
M.2 | 1 x M.2 (Key M, 2260) with PCIe x1 (Optional for VPU) |
Audio
Interface | Realtek ALC887, High Definition Audio Header |
---|
Ethernet
Controller/ Speed | LAN1: Realtek RT8119I with 10/100/1000 Mbps LAN2: Realtek RT8119I with 10/100/1000 Mbps LAN3: Intel® I210IT with 10/100/1000 Mbps LAN4: Intel® I210IT with 10/100/1000 Mbps (Optional: LAN4 supports POE function by ASRI PSE module) |
---|---|
Connector | 4 x RJ-45 |
Rear I/O
HDMI | 1 x HDMI 1.4a |
---|---|
Ethernet | 4 x 1 Gigabit LAN |
USB | 1 x USB 3.1 (Gen1), 3 x USB 2.0 |
Internal Connector
USB | 2 x USB 2.0 (1 x 2.54 pitch header) |
---|---|
COM | 2 x COM(RS232/422/485), 4 x COM(RS-232) |
GPIO | 4 x GPI, 4 x GPO |
TPM | TPM Header |
LVDS | N/A |
VGA | 1 |
SATA PWR Output | 1 |
Speaker Header | 1 |
PS/2 | 1 |
Storage
M.2 | 1 x M.2 (Key M, 2242/2260/2280) with SATA2 for SSD |
---|---|
SATA | 1 x SATA2 (3Gb/s) |
Watchdog Timer
Output | From Super I/O to drag RESETCON# |
---|---|
Interval | 256 Segments, 0, 1, 2, ...255sec |
Power Requirements
Input PWR | 12V DC-In (with 4-pin wafer PWR cable or DC Jack) |
---|---|
Power On | AT/ATX Supported - AT : Directly PWR on as po wer input ready - ATX : Press button to PWR on after po wer input ready |
Environment
Operating Temp | 0ºC ~ 60ºC |
---|---|
Storage Temp | -40° C ~ 85° C |
Operating Humidity | 5% ~ 90% |
Storage Humidity | 5% ~ 90% |