Innodisk CFast 3ME3
The CFast 3ME3 from Innodisk uses SATA III 6.0 Gb/s, which offers read data transfer speeds of up to 220MB/s and sequential write speeds of up to 130MB/s. It complies with the CFast 2.0 standard, has been designed with a 7+17 pin connector and is SATA compatible. Due to energy savings at standby, it reduces energy consumption by 30%. The CFast 3ME3 is characterized by its small format and is suitable for most industrial applications.The CFast 3ME3 can work in extreme conditions and complies with the ATA protocol. Without additional drives, the drive can be configured as a boot or data storage device. The CFast 3ME3 supports hardware anti-write protection to prevent modification of valuable data on a device. Additionally, through Innodisk's improved power-on/off technology and more capacitors, the CFast 3ME3 prevents data loss caused by sudden power failure. Innodisk iSMART allows users to monitor the operating status of the SSD as well as visualize wear leveling with graphs.
- Innovative Firmware Algorithm
- DRAM-less, 100% data integrity
- Excellent random performance
- Wide Temperature: -40℃~85 ℃
- Supports TRIM/NCQ/SMART
- Built in iData Guard
Industria / MemoriasTransporte
-
DRAM
-
Interfaz
-
MLC
-
Rango extendido de temperatura
Specifications
| Model Name | CFast 3ME3 |
| Interface | SATA III 6.0 Gb/s |
| FlashType | MLC |
| Type | Standard |
| Capacity | 8GB~512GB |
| Sequential R/W (MB/sec, max.) | 420/220 |
| Max. Power Consumption | 1.9W |
| Max. Channels | 2 |
| Thermal Sensor | ST-Optional / WT-Default |
| H/W Write Protect | Optional |
| SMART | AND |
| ATA Security | AND |
| Dimension (WxLxH/mm) | 42.8 x 36.4 x 3.6 |
| vibration | 20G@7~2000Hz |
| shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operating Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |