Innodisk DRAM DDR5 ECC UDIMM
The JESD79-5 DDR5 SDRAM specification has significant improvements in capacity, speed and voltage. By structure wise, the Power Management IC (PMIC) is moved onto the DIMM, reducing redundant power management circuitry on the motherboard for unused DIMM slots in previous generations. From JEDEC standard, the DDR5 specification is bringing the maximum potential capacity for a single DDR5 DIMM to 128GB, a theoretical maximum transfer speed of 6400MT/s which is doubling the rate of DDR4, along with the improved power consumption as 1.1V.The modules come equipped with 30μ”Gold Fingers, and another significant structural change is dual-channel DIMM architecture. For DDR5, each DIMM has two 36-bit channels (32 data bits plus using 4 ECC data bits). Two independent subchannels improve memory access efficiency, leading to greater speeds with higher efficiency.
The modules from innodisk comply with all relevant JEDEC standards and are available in 16GB, 24GB, 32GB, and 48GB capacities, with speeds of 4800MT/s and 5600MT/s.
- Single Error Correction and Detection Available
- Fully Tested and Optimized for Stability and Performance
- Uses Original IC to Meet Strict Industrial Standards
- On module Power Management IC (JEDEC Standard: 1.1V)
- 30μ” Gold Finger
- Operating Environment: 0°C ~ 95°C (Tc)
- Anti-Sulfuration Protection Against Harsh Environments
- RoHS Compliance
- CE/FCC Certification
Comunicación / MemoriasIndustria
Medicina
-
DRAM
Specifications
| DDR Generation | DDR5 |
| DIMM Type | ECC UDIMM |
| Speed | 4800 MT/s, 5600 MT/s |
| Density | 16GB, 32GB, 24GB, 48GB |
| Function | ECC Unbuffered Memory |
| Pin Number | 288pin |
| Bus Width | x72 |
| Voltage | 1.1V |
| PCB Height | 1.23 Inches |
| Operating Temperature | 0°C to 95°C (Tc) |
| 30μ” Gold Finger | Y |
| Anti-Sulfuration | Y |