Innodisk mSATA 3SE3
Innodisk mSATA 3SE3 is designed with the mSATA format of MO-300/MO-300B established by JEDEC, and supports the SATA III (6.0 Gb/s) standard with excellent performance. In terms of mechanical interference, Innodisk's mSATA 3SE3 replaces the traditional hard drive and helps make personal computers, in any application, smaller and simpler.Innodisk's mSATA 3SE3 effectively reduces operating system boot time and consumes less power than a hard drive (HDD). Likewise, it is compatible with the ATA protocol, no additional drives are required, and it can be configured as a boot or data storage device.
- SATA 6.0 Gb/s interface
- iSMART disk health monitoring
- Intelligent error recovery system
- Excellent data transfer speed
- Zero mechanical interference
- Anti-vibration mechanical design
- JEDEC standard MO-300 dimension
Industria / Memorias
-
HDD
-
Interfaz
-
SLC
-
Rango extendido de temperatura
Specifications
| Model Name | mSATA 3SE3 |
| Interface | SATA III 6.0 Gb/s |
| FlashType | S.L.C. |
| Type | Standard |
| Capacity | 4GB~128GB |
| Sequential R/W (MB/sec, max.) | 385/225 |
| Max. Power Consumption | 0.5W (3.3V x 180mA) |
| Max. Channels | 4 |
| Thermal Sensor | ST-Optional / WT-Default |
| H/W Write Protect | N |
| SMART | AND |
| ATA Security | AND |
| Dimension (WxLxH/mm) | 29.8 x 50.8 x 3.4 |
| vibration | 20G@7~2000Hz |
| shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operating Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |