Innodisk SATADOM-ML 3MG2-P
Innodisk Serial ATA Disk on Module (SATADOM®) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM®-ML 3MG2-P is designed as the smallest form factor size that could enhance compatibility with various design applications.The innovative Pin 8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on customers’ system without additional power cable. Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD), and can work under harsh environment compile with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.
- Built-in Pin 8 power supply
- Best boot drive solution for server and embedded system
- SATA 6Gb/s interface
- High IOPS to reduce boot up timing
- Innovative Firmware Algorithm
- Anti-vibration mechanical design
- Built in iData Guard
- Hardware write protection supported
Industria / MemoriasSeguridad
-
DRAM
-
HDD
-
Interfaz
-
MLC
-
SSD
-
Rango extendido de temperatura
Specifications
| Model Name | SATADOM-ML 3MG2-P |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | MLC |
| Type | Vertical |
| Capacity | 32GB~256GB |
| Sequential R/W (MB/sec, max.) | 560/180 |
| Max. Power Consumption | 2.68W (5V x 535mA ) |
| Max. Channels | 4 |
| Thermal Sensor | Y |
| H/W Write Protect | Y |
| Pin 7 Power | Y |
| Pin 8 Power | Y |
| S.M.A.R.T. | Y |
| ATA Security | Y |
| Dimension (WxLxH/mm) | 37.17 x 31.5 x 10.2 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -40°C ~ +85°C |
| Operation Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |