Innodisk SATADOM-MV 3ME3
Innodisk SATADOM-MV 3ME3 is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Innodisk SATADOM-MV 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.Innodisk SATADOM-MV 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
- Best boot drive solution for server and embedded system
- SATA 6Gb/s interface
- High IOPS to reduce boot up timing
- Built-in Pin 7 power supply
- DRAM-less, 100% data integrity
- Innovative Firmware Algorithm
- Anti-vibration mechanical design
- Built in iData Guard
Industria / Memorias
-
DRAM
-
HDD
-
Interfaz
-
MLC
-
Rango extendido de temperatura
Specifications
| Model Name | SATADOM-MV 3ME3 |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | MLC |
| Type | Vertical |
| Capacity | 8GB~128GB |
| Sequential R/W (MB/sec, max.) | 220/80 |
| Max. Power Consumption | 1.8W (5V x 370mA ) |
| Max. Channels | 4 |
| Thermal Sensor | Wide Temp. only |
| H/W Write Protect | Y |
| Pin 7 Power | Y |
| Pin 8 Power | N |
| S.M.A.R.T. | Y |
| ATA Security | Y |
| Dimension (WxLxH/mm) | 25.2 x 41.5 x 6.8 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |