Litemax APIX-KBL7
Pico-ITX Embedded Board with Intel® 7th Gen Core™ i7/i5/i3 / Celeron® processors, HDMI(DP)/LVDS, SATA III, 2 COM, 5 USB, AMIO, Intel® GbE LAN.
- Intel® 7th Gen Core™ i7/i5/i3 and Celeron® Processors on board
- One260-pin SO-DIMM DDR3L up to DDR4 SDRAM up to 2133 MHz
- Multi-Display: HDMI(DP)/LVDS/AMIO (DP v1.2 interface, optional)
- 1 M.2 E-Key 2230 (WiFi/BT), 1 M.2 M-Key 2242 (MVMe), 1 AMIO expansion slots
- 1 SATA III, 2 COM (1 w/ either COM or DIO), 2 USB 3.0 and 3 USB 2.0
- Supports 4K/2K Resolution Display
- DC-in 12V, EuP/ErP 2013 Ready
Digital Signage / PlacasIndustria
Kiosk
-
Bluetooth
-
DC
-
Display Port
-
HDMI
-
Intel
-
Interfaz
-
LAN
-
Serie
-
SSD
-
USB
-
Wifi
Specifications
| Model name | APIX-KBL7 |
| Form Factor | 2.5" PICO-ITX |
| Dimensions (L)x(W)mm | 100mm x 72mm (3.94" x 2.84") |
| Processor | Intel® 7th Gen Core™ i7/i5/i3/Celeron® processors Core™ i7-7600U 2.8GHz DC (15W) Core™ i5-7300U 2.6GHz DC (15W) Core™ i3-7100U 2.4GHz DC (15W) Celeron® 3965U 2.2GHz DC (15W) |
| Chipset | Intel® Kaby Lake-U processor integrated |
| BIOS | AMI UEFI Flash ROM |
| LAN Controller | Intel® I219LM GbE PHY w/ AMT (only Core™ i7/i5 prosessor support) |
| Audio Codec | Realtek ALC888S |
| Watchdog Timer | Yes |
| Memory | |
| Technology | DDR4 SDRAM up to 2133 MHz |
| Max. Capacity | Up to 16GB |
| Socket | 1 x 260-pin SO-DIMM |
| Display | |
| Graphic | Intel® HD Gen. 9-LP graphics |
| Display Interface | 1 x HDMI v1.4 (DP v1.2 co-layout optional), 1 x LVDS (Dual-channel 18/24-bit) 1 x AMIO (DP v1.2 optional) |
| I/O | |
| Expansion Slot | 1 x M.2 E-key 2230 (WiFi/BT) 1 x M.2 M-key 2242 (SSD) 1 x AMIO (optional) |
| AND | 1 x 10/100/1000 Mbps |
| Serial ATA | 1 x SATAIII |
| Audio | Line-in, Line-out, Mic-in |
| USB | 2 x USB 3.0, 3 x USB 2.0 |
| WITH | 1 x RS-232/422/485, 1 x RS-232 (either for DIO) |
| Display | 1 x HDMI (co-layout DP optional), 1 x AMIO (DP interface option), 1 x LVDS |
| Digital I/O | 1 x 8-bit (either for COM) |
| SMB | 1 x SMBus |
| PS/2 | N/A |
| Power Requirement | |
| Power connector | 1 x DC-Jack screw type or WF 1x2pin(optional) |
| Power Type | DC-IN 12V |
| Power Mode | AT/ATX (by jumper selection) |
| Environment | |
| Storage Temperature | -40°C ~ 80°C (-40°F ~ 176°F) |
| Relative Humidity | 0% ~ 95% (non-condensing) |
| Operating Temperature | 0°C ~ 60°C (32°F ~ 140°F) standard -20°C ~ 70°C ( -4°F ~ 158°F) optional -40°C ~ 70°C (-40°F ~ 158°F) optional |