Seco DEV-KIT-Q7-2.0
Cross Platform Starter Kit compatible with both x86 and Arm Rev. 2.0 Qseven® modules: a complete package including the basic components necessary to start developing. (Formerly Q7 DEV KIT 2.0)- Carrier board for Qseven® Rev. 2.0 compliant modules CQ7-A42 (DP or HDMI version)
- HD Audio module
- I2S Audio module
- One 12VDC Notebook Power Adapter
- Cable kit
- Adapter for mounting a microQ7 module on standard Qseven carrier boards
Industria / Módulos
-
ARM
-
DC
-
Display Port
-
HDD
-
HDMI
-
Interfaz
-
Serie
-
USB
Specifications
| Description | The Starter Kit contains: • Carrier board for Qseven® Rev. 2.0 compliant modules CQ7-A42(DP or HDMI® version) • HD Audio module • I2S Audio module • One 12VDC Notebook Power Adapter • Cable kit • Adapter for mounting a microQ7 module on standard Qseven carrier boards Qseven® module not included. Must be purchased separately |
| Video interfaces | LVDS Dual Channel 24-bit + backlight connectors or 2 x eDP connectors Multimode Display Port or HDMI® Connector |
| Mass storage | 1 x S-ATA connector with HDD Power connector 1 x mSATA Slot microSD Slot on combo microSD + SIM connector |
| Networking | Up to 2 x Gigabit Ethernet connectors |
| Usb | 1 x USB 3.0 Host port on type-A socket 2 x USB 2.0 Host ports on double Type-A sockets 2 x USB 2.0 Host ports on internal pin header 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with miniPCI-e slot) |
| PCI | miniPCI-e slot Full/Half size, combined with SIM card slot |
| Audio | Audio interface on internal pin header |
| Serial ports | 4-wire RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven® module) CAN interface on PCB terminal block |
| Other interfaces | SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module |
| Electrical power supply | +12VDC Mini-fit Standard ATX power connector Coin cell battery Holder for CMOS and RTC |
| Operating temperature | -40°C ÷ +85 °C (industrial range) *All carrier board components must remain within the operating temperature at any and all times, including startup; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system. |
| Dimensions | 146 x 102 mm (5.75” x 4.02”) |