Seco SBC-3.5-RK3399
SBC de 3,5" con SoC Rockchip RK3399. (SOLON - C31)- Rockchip RK3399 Processor
- 4-Core Mali-T860MP4 GPU
- Up to 2x GbE; opt WiFi; up to 2x RS-232 or RS-485 or CAN; opt Modem with SIM slot or eSIM
- Soldered-down LPDDR4 memory, up to 4GB total
Digital Signage / PlacasEnergía
Industria
Transporte
-
Android
-
Bluetooth
-
Display Port
-
HDMI
-
Interfaz
-
Linux
-
Lte
-
Serie
-
USB
-
Wifi
Specifications
| Description | SBC de 3,5" con SoC Rockchip RK3399 |
| Cpu | Rockchip RK3399 processor, 2x Cortex®-A72 MP cores + 4x Cortex®-A53 MPCores, up to 1.8GHz, 64-bit architecture |
| Max cores | 2+4 |
| Memory | Soldered-down LPDDR4 memory, up to 4GB total, 64-bit interface |
| Print shop | 4-Core Mali-T860MP4 GPU OpenGL ES 1.1/2.0/3.0/3.1, OpenVG 1.1, OpenCL, DX11 support Embedded VPU, able to offer: H.265 10-bit, H.264 10-bit, VP9 8-bit 4Kx2K@60fps HW Decoding MPEG-4/MPEG-2/VP8 1080p@60fps HW Decoding H.264, VP8 1080p@30fps HW encoding Supports 2 independent video outputs |
| Video interfaces | LVDS Single / Dual Channel interface eDP 1.3 interface HDMI® 4K interface DP 1.2 interface on USB Type-C connector (alternate mode) |
| Video resolution | HDMI®, DP: Up to 4K x 2K @60Hz eDP: Up to 4096 x 2160 (4K) LVDS: Up to 1920 x 1080 @60Hz |
| Mass storage | SPI Flash (alternative to CAN Controller #1) eMMC 5.1 Drive soldered on-board microSD slot |
| Networking | Up to 2 x Gigabit Ethernet ports Optional soldered on-board M.2 1216 WLAN 802.11 a/b/g/n/ac + BT 5.0 module Optional on-board LTE Modem |
| Usb | 1 x USB 3.0 Type-C port (Alternate mode with DP) 1x USB 3.0 Host port on Type-A socket 2 x USB 2.0 Host ports on Dual Type-A socket Up to 2 x USB 2.0 Host ports on internal pin header |
| Audio | Optional I2S Audio Codec w/ TRSS Jack (MicIn / Lineout) |
| Serial ports | 1x Debug UARTs Up to 2x RS-232 (factory options) Up to 2x RS-485 (factory options) Up to 2x CAN ports (factory options) |
| Other interfaces | Optional 2x MIPI-CSI Camera connectors, 4-lanes CSI input each one miniSIM slot or eSIM for on-board optional modem I/O Connector #1 with I2C interface + 1x Open-Drain + (RS-232 or RS-485 - factory alternatives) I/O Connector #2 with 3xGPIOs + 1x PWM + (RS-232 or RS-485 or TTL UART - factory alternatives) Dedicated connector for I2C Touch Screen Controller Support Optional Ultra-low Power RTC (Alternative to CAN Controller #2) Optional SPI external interface (alternative to CAN Controller #1) Optional LED Driver Optional Trust Secure Element on-board |
| Electrical power supply | +12VDC÷ +24VDC |
| Operating system | Linux Yocto Android (under development) |
| Operating temperature | 0°C ÷ +60°C (Commercial Temperature range) -20°C ÷ +85°C (Extended Temperature range) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
| Dimensions | 146x102 mm (3.5" form factor) |