Seco SBC-3.5-SBC-3.5-MX8
SBC de 3,5" con procesadores de aplicaciones NXP i.MX8. (THEMIS - C43)- NXP i.MX 8 Family
- 2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit/XVSX (QuadMax and QuadPlus)
- 2x Gigabit Ethernet interfaces
- Soldered down LPDDR4
Digital Signage / PlacasIndustria
Kiosk
Medicina
Smart City
-
Android
-
ARM
-
Bluetooth
-
Display Port
-
HDMI
-
Interfaz
-
Linux
-
USB
-
Wifi
Specifications
| Description | 3.5" SBC with NXP i.MX8 application processors |
| Cpu | NXP i.MX 8 Family: i.MX 8QuadMax : 2x ARM Cortex®-A72 + 4x ARM® Cortex®-A53 + 2x Cortex®-M4F i.MX 8QuadPlus : 1x ARM Cortex®-A72 + 4x ARM® Cortex®- A53 + 2x Cortex®-M4F |
| Max cores | 8 |
| Memory | Soldered down LPDDR4 memory, 64-bit interface, 1600MHz. Base configuration 2GB, up-scalable to 4GB, 6GB, 8GB |
| Graph | 2x Graphics accelerators Vivante GC7000 / XVSX or GC7000Lit / combined resolution 4K) |
| Video interfaces | OUTPUTS: HDMI® output (Micro) Optional eDP 1.4 interface Optional Single/Dual-Channel 18-/24- bit LVDS interface INPUTS: HDMI® input 2x 4-lanes MIPI-CSI Camera interfaces |
| Video resolution | HDMI®: Up to UltraHD (4K) LVDS, eDP: up to 1080p |
| Mass storage | eMMC 5.1 Drive soldered on-board, up to 64GB 1x S-ATA interface available on M.2 Socket 2 Key B Slot (interface shared with PCI-e x1) microSD Card Slot 4MB QuadSPI Flash NAND (boot device only) |
| Networking | 2x Gigabit Ethernet interfaces Combo WiFi 802.11 a/b/g/n/ac + BT LE 4.2 module with ceramic SMT antennas on-board M.2 Socket 2 Key B Slot for M.2 Modems M.2 Socket1 Key E Slot for WiFi + BT external modules |
| Usb | 1 x USB 3.0 Host port on Type-A socket 1x USB 2.0 OTG port on micro-AB socket 1x USB 2.0 Host port on external Type-A socket 1x USB 2.0 Host port on internal connector 2 x USB 2.0 ports available on M.2 Key B and Key E slots |
| Audio | I2S Audio Codec HP + MIC interfaces, available on a single combo TRRS connector |
| Serial ports | 1x UART TTL 1x RS-232 / UART TTL configurable 1x RS-485 / RS-422 / UART TTL configurable 3x CAN interfaces |
| Other interfaces | 4x Analog Inputs 6x GPIOs SPI interface I2C interface Embedded additional RTC circuitry for lowest power consumption SIM dedicated slot |
| Electrical power supply | +12VDC ±10% |
| OS | Wind River Linux Yocto Android |
| Operating temperature | 0°C ÷ +60°C (Commercial version) -40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the indicated range. |
| Dimensions | 146 x 102mm (5.75” x 4.02”) |