Seco SOM-uQ7-MX6-2
Módulo μQseven® con procesadores NXP i.MX 6 (NEMBUS - A75)- Single and Dual Core Lite (ARM Cortex™A9 Cores)
- 2D/3D dedicated graphics processors
- FastEthernet; GPI/Os
- Up to 1GB DDR3L on-board
Industria / MódulosSmart City
-
ARM
-
HDMI
-
Interfaz
-
Linux
-
USB
Specifications
| Description | The extremely low power and low cost μQseven Rev. 2.0 Compliant Computer on Module (CoM) with the NXP i.MX 6 Processor features all the processor and integrated native I/O capabilities of the SoC, in compliance with the Qseven standard, at the competitive cost of a proprietary module. This board is supplied with a complete and fully-featured BSP, for easy migration from, and to, the entire i.MX 6 product family, along with dedicated hardware and software development support. |
| Cpu | NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors - i.MX6S Solo - Single core up to 1GHz - i.MX6DL Dual Lite - Dual core up to 1GHz per core |
| Max cores | 2 |
| Memory | Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F |
| Graph | Dedicated 2D Hardware accelerator Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D Supports 2 independent displays |
| Video interfaces | 1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface HDMI Interface |
| Video resolution | LVDS, resolution up to 1920x1200 HDMI, resolution up to 1080p |
| Mass storage | On-board eMMC drive, up to 8 GB SD / MMC / SDIO interface Internal SPI Flash for booting |
| Networking | Fast Ethernet (10/100) interface |
| Usb | 1 x USB OTG interface 1 x USB 2.0 Host interface |
| Pci | 1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported) |
| Audio | I2S/AC'97 Audio Interface |
| Other interfaces | On the card edge connector, many pins can be used as General Purpose I / Os or to implement some(*) of the following extra functionalities: - Additional SD interface - Up to 4 UARTs - CAN interface - Watchdog(s) - I2C interfaces - PWM outputs - SPI interface - Additional Audio interface (*) not all the combinations are allowed simultaneously Power Management Signals |
| Electrical power supply | +5VDC ±5% Optional Low Power RTC |
| OS | Linux Yocto |
| Operating temperature | 0°C ÷ +60 °C (commercial temp.)* -40°C ÷ +85°C (Industrial temp.)* *Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the indicated range. |
| Dimensions | 40x70mm (1.57” x 2.76”) |