Vecow VCOM-BASE

VCOM-BASE is an ATX form factor design in support of Type 6 COM Express Module and conforms to COM Express Carrier Design Guides. The VCOM-BASE is equipped with 1 PCIe x16, 1 PCIe x4, 1 PCIe x1 slot and supports up to 3 independent displays. Together with COM Express Type 6, VCOM-BASE provides the off-the-shelf solution for industrial embedded deployment.

Conforms to COM Express® Carrier Design Guide, supports type 6 modules in compact form factor
1 PCIe x16 slot, 1 PCIe x4 slot, 1 PCIe x1 slot
Supports 3 Digital Display Interface (DDI) with VGA/DVI/DisplayPort
Dual BIOS (SPI and LPC)

Industria / Módulos
Seguridad

4G
5G
Display Port
DVI
Interfaz
LAN
Linux
USB
VGA
Windows

Specifications

Form Factor
Module Interface	PICMG® COM Express ® Revision 2.0 supports Type 6 modules in Basic or Compact Form Factor
Dimensions (L x W)	244mm x 305mm (9.61" x 12.01")
Display
Interface	・1 VGA ・1 LVDS ・1 DVI-D ・2 DisplayPort
Ethernet
LAN	Base on COMe Module
Audio
Audio Codec	Realtek ALC888S-VD, 7.1 Channel HD Audio
Audio Interface	1 Mic-in, 1 Line-out, 1 Line-in
Storage
SATA	3 SATA III (6Gbps)
mSATA	mSATA 1 SATA III (Mini PCIe Type, 6Gbps)
M.2	1 M.2 Key B Socket (PCIe Interface)
Expansion
PCIe	・1 PCIe x1 Slot ・1 PCIe x4 Slot ・1 PCIe x16 Slot
Mini PCIe	1 Full-size Mini PCIe Socket for PCIe/USB/SIM Card/Optional
M.2	・1 M.2 Key B (3042/2280) ・1 M.2 Key E (2230)
Power
Power Input	ATX : 12V±5% / 5Vsb ±5%; or AT : 12V±5%
Power Interface	ATX Power Connector
Environment
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 85°C
Humidity	5% to 95% Humidity, Non-condensing
Relative Humidity	95% ＠ 60°C
EMC	CE, FCC

I/O Interface
Rear I/O	・1 VGA Connector ・1 DVI-D Connector ・2 DisplayPort Connector ・4 USB 3.0 Connector ・1 RJ45 Connector ・2 COM Connector ・1 Line-in/out, Mic-in
Internal I/O	・2 USB 2.0 Connector ・1 LVDS Header ・1 LVDS Power Header ・3 SATA Data Connector ・1 FAN Connector ・RAW AB/CD Connector ・1 PCIe x1 Slot ・1 PCIe x4 Slot ・1 PCIe x16 Slot ・1 M.2 Key B Socket (3042/2280) ・1 M.2 Key E Socket (2230) ・1 mSATA Socket ・1 Mini-PCIe Socket ・2 SIM Socket ・1 GPIO Header (GPI x4, GPO x4) ・4 Buttons for GPI ・2 7-Segment Display (for Debug Port) ・1 SPI BIOS BOX ・1 LPC Debug Header ・1 LPC Test Header ・1 EEPROM Address A0 Selection ・1 EEPROM Address A1 Selection ・1 I2C Bus Header ・1 SMB Bus Header ・1 LVDS Flat Panel Connector ・1 Backlight Control ・1 LVDS Backlight Power Voltage Header ・1 LVDS Panel Power Voltage Header ・1 LVDS Backlight Enable Signal Type Header ・1 LVDS Brightness Control Header ・1 LVDS Brightness PWM Source Header ・1 ATX 24-pin Power Connector (for Carrier) ・1 ATX 12V 4-pin Connector (for Module) ・1 Smart Battery Conneco ・1 PWR_OK Config Header ・1 PWR AT/ATX MODE Header ・1 PWR PS_ON# Signal Source Header ・1 PWR AT Power 5V Setting(for module 5Vsb) Header ・1 PWR 5VSB to Module Source Header ・1 Miscellaneous Header ・1 Clear CMOS Header ・2 BIOS Selection Header ・1 Buzzer