Innodisk SATADOM-SL 3SE4
The SATADOM-SL 3SE4 from Innodisk features an L³ architecture with the latest Marvell NAND controller and SLC NAND Flash. Innodisk's unique L³ architecture is L² architecture multiplied by LDPC (Low Density Parity Check). The L2 (Long Life) architecture is a 4K mapping algorithm that reduces the Write Amplification Factor (WAF) and incorporates a real-time wear leveling algorithm to provide optimal performance and extended life with a exceptional reliability.Innodisk's SATADOM-SL 3SE4 is designed for industrial applications and supports several standard features such as TRIM, NCQ and SMART. Additionally, Innodisk's unique industry-oriented firmware provides flexible customization service, making it perfect for a variety of industrial applications.
The innovative Pin 8 uses the SATA connector itself as a power source to drive the device without external cables. It can be connected directly to the onboard SATA socket in the customer system without additional power cables. In addition, the boot time and power consumption is less than that of a hard drive (HDD), it can operate in harsh environments, it supports the ATA protocol, requires no additional drives, and can be configured as a boot device or of data storage.
- SATA III solution for industrial field
- Exclusive L³ architecture
- DRAM-less, 100% data integrity
- High IOPS to reduce boot up timing
- Designed with hardware LDPC ECC engine
- Support Pin 7/Pin 8 power supply
Industria / Memorias
-
DRAM
-
HDD
-
Interfaz
-
SLC
-
Rango extendido de temperatura
Specifications
| Model Name | SATADOM-SL 3SE4 |
| Interface | SATA III 6.0 Gb/s |
| FlashType | S.L.C. |
| Type | Vertical |
| Capacity | 8GB~32GB |
| Sequential R/W (MB/sec, max.) | 520/260 |
| Max. Power Consumption | 0.93W (5V x 186mA) |
| Max. Channels | 2 |
| Thermal Sensor | AND |
| Pin 8 Power | AND |
| Pin 7 Power | AND |
| SMART | AND |
| ATA Security | AND |
| Dimension (WxLxH/mm) | 33.06 x 29.6 x 10.5 |
| vibration | 20G@7~2000Hz |
| shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operating Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |